Mecal P200 Bench Press

The P200 Crimping Press has been specifically conceived to crimp very big-section wires or to handle embossing process where pressure up and above 20 tons is called for.

The P200 Crimping Press has been specifically conceived to crimp very big-section wires or to handle embossing process where pressure up and above 20 tons is called for. Designed to accept Extreme Duty Two-Post Die MSCS, with the specific adapting shank can also receive Two-Post Dies MSA. With the press ram at Bottom Dead Center, the P200 has a crimping height of 190 mm. The P200 Crimping Press has a regulating head PN 951270110, which allows for a continuous setting of the crimping height, with a 0.1mm resolution and a 5.8mm range. It is fitted with a 360° safety cover, the only open side of which is protected by a set of optical barriers. As an alternative, the open side can be protected by an air operated moving cover. All the controls, including the one allowing a step-by-step cycling of the press, are placed on two external control boxes. Produced under a quality Management System certified to ISO 9001 (TÜV).

Model number

P200 Bench press

Power

9.4kW (12.5HP)

Force

20000Kg

Stroke

50mm

Crimp Height

190mm

Weight

1550Kg

Dimensions (W × H × D)

900mm x 2600mm x 1400mm

Configuration

Manual

Power supply

380 / 400 Vac – 3P + N

Voltage supply

400V / 230V / 480V

Surface finish

Light grey RAL7038

Crimping
There are no documents for this product yet.