Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348
salesleadmaker.co.uk

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
New from Komax! Mira 230
Programmable Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table

 

 

                                      

 

Mecal P040 Bench Press

 

 

 

This press is rated at 4 tonnes and will handle larger crimping requirements, typically up to 10mm.

The P040 Crimping Press is available either in semi-automatic (for bench-top use BT) configuration or in full automatic (integrated into a cut and strip machine) configuration. It can be coupled to all mini-applicators and applicators with the standard T-coupling and to all two-post crimping dies with a 20mm-diameter coupling shank. The P040 is normally delivered with a 135.8mm +/- 0.02mm crimping height ( measured from the applicator base plate to the press T-coupling when at Bottom Dead Centre). Upon request a shank coupling can be installed to set the crimping height to 212mm for MSA Crimping Dies. Fitted with a self-braking electric motor, the P040 has a standard stroke of 40mm, and upon request a variable stroke version is available: in this configuration the stroke can be set between 20 and 40mm, in 5mm increments. Other different strokes are available upon request. Mecal’s own CFA crimp force analyser can be fitted as an option. The semi-automatic configuration (for bench top use) always includes safety cover, reel arm, foot switch according to the international safety standard and CE regulation.

  • Available for bench or automatic use
  • Cast frame
  • Standard 40mm stroke - variable stroke attachment available (20-40mm)
  • Industry standard shut height 135.8mm
  • Accepts all standard Miniapplicators
  • Adaptor kits for alternative applicator styles available
  • Folding guard and footswitch supplied with bench version
  • Crimp Force Analyser available for this press

SPECIFICATION

ID                           P040 

POWER                    1,87Kw (2,5HP) 

FORCE                    4000Kg (8900lb) 

STROKE                  20mm (0.78”) / 

                              25mm (0.98”) / 

                              30mm (1.18”) / 

                              35mm (1.38”) / 

                              40mm (1.57”)   

SHUT HEIGHT          135,8mm (5,34") applicators 

     212mm (8,34") two post die 

WEIGHT                  148Kg (326lb) 

DIMENSION (mm)    W360xH1050xD400 

DIMENSION (")        W14.1” x H41.3” x D15.7” 

CONFIGURATION     Benchtop / automatic 

POWER SUPPLY        Man 3F / Auto 3F 

VOLTAGE                400V / 230V / 480V 

SURFACE FINISH     Light grey RAL7038