Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348
salesleadmaker.co.uk

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
Latest Komax Wire Stripper - The Mira 340
Programmable Rotary Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table

 

 

                                      

 

Mecal Two-Post Die Tools

 

 

 

The Two-Post Die tools are capable of crimping terminals on conductor sizes up to 75mm².

 

  • A tool for very large terminals
  • Very robust construction
  • Usual Mecal quality and reliability
  • Pneumatic feeding as standard
  • Continuous crimp height adjustment system
  • Ideally matched to Mecal P104 press
  • Comprehensive operators manual
  • Capability studies available
  • Cross sectional pictures of crimp available
  • Anvil can be replaced without removing tool from press
  • 2 part anvil means only the worn part gets changed
  • Crimpers can be replaced without removal of the ram from the tool or the tool from the press
  • Produced under a quality Management System certified to ISO 9001 (TÜV).

 

 

MSAP-S Mecal Two-Post Die for pneumatic feeding of very large side feed terminals

MSAP-F Mecal Two-Post Die for pneumatic feeding of very large rear feed terminals

 

 

 

 

 

SPECIFICATIONS

Max cable size                      75mm² (3/0AWG)

Terminal thickness                > 1.5mm

Shut height                                   212mm

Stroke                                 50 / 40mm

Feeding System                    Pneumatic 5 - 6 bar

Weight                                 17 Kg

Dimensions (mm)                 W450  H210  D150

 

Two-Post Die for Loose Pieces
  • A tool for very large terminals
  • Very robust construction
  • Usual Mecal quality and reliability
  • Manual feeding slide with interlock
  • Continuous crimp height adjustment system
  • Ideally matched to Mecal P104 press
  • Comprehensive operators manual
  • Capability studies available
  • Cross sectional pictures of crimp available
  • Anvil can be replaced without removing tool from press
  • 2 part anvil means only the worn part gets changed
  • Crimpers can be replaced without removal of the ram from the tool or the tool from the press
  • Produced under a quality Management System certified to ISO 9001 (TÜV).

 

MSAS Mecal Two-Post Die with interlocked slide for large loose piece terminals

SPECIFICATIONS

Max cable size                      75mm² (3/0AWG)

Terminal thickness                > 1.5mm

Shut height                          212mm

Stroke                                 50 / 40mm

Feeding System                    Manual slider

Weight                                 13.6 Kg

Dimensions (mm)                 W170  H210  D200