Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348
salesleadmaker.co.uk

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
Latest Komax Wire Stripper - The Mira 340
Programmable Rotary Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table

 

 

                                      

 

Mecal Pull Tester SMST

 

 

 

To measure the force needed (in Newtons) to pull a terminal off a wire. Pulling speed can be adjusted to suit certain test criteria. Each unit is calibrated and tested at Mecal. A serial comms port is included to interface with on line quality systems.

SPECIFICATIONS


Pulling speed                 15 - 200 mm/minute
Max pulling power (N)     2000
Min pulling power (N)      10
Dimensions (mm)           W190xH240xD410
Weight (Kg)                   14.00
Power                            230V ac


Every SMST is tuned in Mecal's laboratory following Mecal standard NR 0010 Ed.1 dated 06/99, and its calibration is carried out with Mecal specific equipment MST 0158, fitted with 546 QDT force analyzer - s/n 19563 (certification SIT 990164).