Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
Latest Komax Wire Stripper - The Mira 340
Programmable Rotary Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table





Mecal P200 Bench Press




The P200 Crimping Press has been specifically conceived to crimp very big-section wires or to handle embossing process where pressure up and above 20 tons is called for. Designed to accept Extreme Duty Two-Post Die MSCS, with the specific adapting shank can also receive Two-Post Dies MSA. With the press ram at Bottom Dead Center, the P200 has a crimping height of 190 mm. The P200 Crimping Press has a regulating head PN 951270110, which allows for a continuous setting of the crimping height, with a 0.1mm resolution and a 5.8mm range. It is fitted with a 360° safety cover, the only open side of which is protected by a set of optical barriers. As an alternative, the open side can be protected by an air operated moving cover. All the controls, including the one allowing a step-by-step cycling of the press, are placed on two external control boxes. Produced under a quality Management System certified to ISO 9001 (TÜV).



ID                                P200 

POWER                        9,4KW (12,5HP) 

FORCE                         20000Kg (44500lb) 

STROKE                       50mm (1,96") 

CRIMPING HEIGHT       190mm (7,48") 

WEIGHT                      1550Kg (3410lb) 

DIMENSION (mm)        W900xH2600xD1400 

DIMENSION (")             (35,43"x102,36"x22,11") 

CONFIGURATION         Manual 

POWER SUPPLY            380/400 Vac - 3P + N 

presa 5 poli 32A cavo 5mm² 

VOLTAGE                    400V / 230V / 480V 

SURFACE FINISH         Light grey RAL 7038