Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
Latest Komax Wire Stripper - The Mira 340
Programmable Rotary Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table





Mecal P080 Bench Press




This press is rated at 8 tonnes and will handle larger crimping requirements, typically up to 25mm.

The P080 Crimping Press is available either in semi-automatic (for bench-top use BT) configuration or in full automatic (integrated into a cut and strip machine) configuration. It can be coupled to all mini-applicators and applicators with the standard T-coupling and to all Two-Post Crimping Dies with a 20mm-diameter coupling shank. The standard variable stroke can be adjusted either to 40 or 50mm, with other strokes available upon request. Fitted with a self-braking electric motor, the P080 is normally delivered with a 135.8mm ± 0.02mm crimping height (measured from the applicator base plate to the press T-coupling when at Bottom Dead Center), but the operator can set the crimping height at 212mm with simple tools and an adapting kit (shank coupling) supplied with the press. Optional safety optical barriers allow the operator to load loose terminals directly over the anvil. Mecal’s own CFA Crimp Force Analyser can be fitted as an option. The semi-automatic configuration (for bench top use) always includes safety cover, reel arm, foot switch according to the international safety standard and CE regulation.


ID                           P080 

POWER                    4.2KW (5.5 HP) 

FORCE                    8000Kg (17800lb) 

STROKE                  30mm (1.18”) / 

32mm (1.26”) / 

35mm (1.38”) / 

40mm (1.57”) / 

50mm (1.97”) / 

60mm (2.36”)   

SHUT HEIGHT          135.8mm (5.34”) mini e magnum

212mm (8.34”) stampi

WEIGHT                  166Kg (365lb) 

DIMENSIONS (mm) W380mm x H1100mm x D420mm 

DIMENSIONS (")      W14.9” x H43.3” x D16.5” 

CONFIGURATION     Benchtop / Automatic 

POWER SUPPLY        Man 3F / Auto 3F 

VOLTAGE                400V / 230V / 480V 

SURFACE FINISH     Light grey RAL7038