The Kappa 310 is an ultra-compact and reasonably priced high-speed
machine. It is designed for the reliable controlled processing of the
finest wire sizes from 0.02mm˛ to 6mm˛. All process parameters can be
saved along with applied pressure values.
The conductor diameter and cross section are
automatically detected by a sensor, so new cable material can be set up
and parameterized at the press of a button. Setup used to be extremely
time-consuming. This unique measuring approach reduces this procedure to
an absolute minimum. Thanks to the optical cable detector, cut losses
are also a thing of the past. The same sensor continuously monitors
processing during production. The end of the cable or stripping errors
are detected at the earliest possible point in time.
Periphery and interfaces
The integration of wire feeding systems,
markers, deposition units, and other peripheral devices is standardized
and easy. Up to six peripheral devices can be controlled parallel to the
main system depending on the machine model. Data backup, updates, import
of CSV cable and product data are handled over a USB stick.
TopTouch is an intuitive touch screen user software modeled on the
TopWin structure found in automatic crimping machines. With the
integrated user prompts, Kappas are extremely easy to operate.
TopWin Kappa expands the capabilities and functions of the fully
automatic Kappa cutting and stripping machines. The PC-based control
software allows sequence production and part list processing. The
products to be produced may be loaded directly to the wire processing
machine or via a job list.
The optional interface WPCS (Wire Processing Communication Stand-ard)
allows Komax machines to be networked under TopWin. With this open
interface, the machine is easy to integrate into existing production
TopNet is a clearly arranged mana-gement software with functions for the
centralized creation and management of parts, articles and jobs that
help you to optimize your production operations.
TopConvert can be used to convert already existing job and article lists
to WPCS format. These data may then be processed directly by the cutting
and stripping machine.
The Komax Kappa line can be customized with various accessories to meet
specific customer needs.
Komax 104 passive dereeler
Wire feed systems
ads 115, ads 119
Preliminary processing of wires
Komax 26 hot stamp marker
Komax 62 notching and slitting machine
CSU intermediate stripping module
Inkjet ims 295 (BC/MC/BS) in offline mode
dps 272 dual drum coiler
KRI 800 wire coiler
dps 261 Binder
dps 375 wire deposit system
KA 3000 wire deposit system
Komax offer to you an optimal support by individual Service offers.
Certified Training Courses