Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348
salesleadmaker.co.uk

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
Latest Komax Wire Stripper - The Mira 340
Programmable Rotary Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table

 

 

                                      

 
Komax Gamma 255 Crimp to Crimp Machine
 
  • Processing of a larger range of cross sections
  • Double side crimping or twisting, fluxing and tinning (even lead-free)
  • Can handle double side crimped wires as short as 20mm
  • Minimal footprint thanks to a compact design
  • Readily accessible
 

Top quality processing over a uniquely broad range of cross sections. This fully automatic crimping machine excels in simplicity of operation and flexibility. No matter what the task, from double side crimping to twisting, fluxing and tinning, the Gamma 255 carries it out with compelling process control and minimal changeover times. In spite of its compactness, this device has fully integrated quality-monitoring and feed systems as part of its standard equipment.  
Function

The Komax Gamma 255 is a flexible fully automatic crimping machine for efficient wire processing. It processes cross sections in a range from 0.0123mm˛/AWG36 to 2.5mm˛/AWG14 in excellent quality. It is compatible with all commercially available applications. It also handles double side crimped wires as short as 20mm.

Technology

The entire cross section is processed using programmable, highly dynamic servo-drives and V stripping blades. As part of its standard equipment, the machine has a prefeeder, splice, wire-end and knot detection, as well as two wire straightening units. The integrated prefeeder assures gentle wire feed from drums, coils or reels even at high draw-in speeds. A bad wire handling system with automatic post-production is also integrated in the Gamma 255. The machine has a WPCS interface so it can fit seamlessly into your network. To verify quality, you can also integrate devices for measuring crimp height (Komax 341) and pull-out force (Komax 331/332) right into the production process. In wire deposition, you have your choice of a wear-resistant passive deposit unit and an active deposit unit featuring batch sorting.

User Friendly

The compact layout is carefully thought-out and allows you to change over from crimping to twisting, fluxing and tinning in no time at all. With its vertically opening safety cover, the Komax Gamma 255 is readily accessible from all sides. Operations and material handling are convenient and simple. The reliable TopWin user interface adds to this high level of user convenience in over 20 different languages.

Flexible

Contemporary wire processing requires total solutions with optimized functions and costs. To meet these demands, processing modules such as the mci 712 and mci 722 crimping presses, the mci 782 twisting module, and the ioc 785 fluxing/tinning module with all process monitoring units are integrated right into the TopWin user software. With a choice of three different crimping presses, you can adapt the Gamma 255 to meet your individual needs. No matter what products you manufacture on the Gamma 255, this machine‘s intuitive operations allow you to make full use of its flexibility. All product data is saved in a database and can be retrieved at any time.

Gamma 255 Fitted with Tinning System

  Software

The optional interface WPCS (Wire Processing Communication Standard) allows Komax machines to be networked under TopWin. With this open interface, the machine is easy to integrate into existing production sequences.

TopNet is a clearly arranged mana-gement software with functions for the centralized creation and management of parts, articles and jobs that help you to optimize your production operations.

TopConvert can be used to convert already existing job and article lists to WPCS format. This data can then be directly processed by fully automatic crimping machines.

Processing modules

The Gamma 255 can be customized with various accessories to meet specific customer needs:

mci 712/722 crimping module
mci 782 twisting module
ioc 785 fluxing/tinning Device

Accessories/options

You can add various accessories to the Komax Gamma 255 to adapt it to your specific needs.

Komax 331, 332, 341, 351
Tower light, magnifying glass
UPS uninterruptible power supply
Deposit gripper for fine wires
Reel stand
Komax 104 de-reeling system
Conveyor belt, basic module 3m

Services

Komax offer to you an optimal support by individual Service offers.

After-Sales Service
Production Assistance
Certified Training Courses
Feasibility Test



Komax Gamma 225 Triple Blade System

Gamma 255 Integrated Wire Feed and Reservoir - Ensures a smooth supply of material for processing.

Technical Details

 

 

 

pdf brochure