Home Products Services  About Us  News Contact Us        
TEL +44 (0)1329 832621
FAX +44 (0)8704 603348
salesleadmaker.co.uk

Komax Products
Laselec Products
Mecal Products
WDT Products
Z&F Products
Kodera Products
New - Off-the-shelf machines
Other Products
 Second User Equipment
Product Selection by Process
New Kappa 315 from Komax!
Latest Komax Wire Stripper - The Mira 340
Programmable Rotary Wire Stripper
Low Cost Crimp Pull Testers
Mecal Crimp Applicators
Insulated Ferrules
Komax Kappa 310 Cut and Strip Machine  
Replacement Blades
Chain Terminals
Wire Size Conversion Table

 

 

                                      

 
Komax Kappa 315 Technical Details
 
 
Wire cross-section, stranded wires* 0.05 – 10 mm²
AWG 30 –8
Max. outer diameter 10 mm (0.4 in.)
Length accuracy Repeat accuracy
± (0.2 % + 1 mm (0.04 in.)
Flat cable processing Optional 12 mm (0.47 in.)
Wire length range 1 – 800’000 mm (0.039 in. – 874.9 yd.)
Short wire lengths Optional 30 mm
Max. wire transport speed 2.0 m/s (78.75 in./s)
Max. stripping lengths Full strip
Side 1: 100 mm (3.94 in.)
Side 2:  40 mm (1.57 in.)
Semi strip
Side 1: 999.9 mm (39.37 in.)
Side 2: 999.9 mm (39.37 in.)
Multi-step strip
Side 1: 999.9 mm (39.37 in.)
Side 2: 999.9 mm (39.37 in.)
Intermediate stripping
Number and length
Optional
Automatic conductor detector
(automatic detection of cut depth,
cable end monitoring)
Optional
Cable detector
(queue, end and slip monitoring, zero-cut optimization, outside diameter measurement)
–
Length measurement system –
Straightening unit Optional
IOCS interface (expandable) 2 (4)
USB/ethernet Standard
Noise level < 70 dBA
Drive system
(with motorized closing axis)
Single roller
Production table Optional
Electrical connection 110/230 VAC ±10%
50/60 Hz
300 VA
Pneumatic connection Optional for blade cleaning
Dimensions (W × H × D) 465 × 385 × 460 mm
(18.3 × 15.2 × 18.1 in.)
Weight 25.9 kg (57 lbs)
 

* Kappa machines can process many conductors outside the indicated cross-section range, however certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross-section range. If in doubt, we are happy to provide you with samples of your wires.