Area of application
The stripping machines process conductors with
outside diameters of 0.6 4mm and cross sections of 0.03 3.3mm² (AWG
32 12). The semi-automatic models can be used for single conductors or
inner conductors of multi-core cables.
High precision and short cycle times for full and partial pull-off are
characteristic of the two devices equipped with V-blades. Operating strictly
electrically, the portable machine can be used anywhere a power socket is
The ease of operation and the short cycle times make both stripping machines
ideal for a great diversity of products made in small to medium quantities.
The operation of the Cosmic 32M and 32M CCD is
highly intuitive and entails no lead time.
With just three analogous controls, you can set diameter, stripping length
and pull-off length. The display shows the cut diameter in 0.01 mm
It is easy to trigger a processing cycle: The stripping process starts
automatically the moment the tip of the conductor touches the trigger
sensor. If automatic triggering is not desired or possible (e.g. due to
flexible conductors), the foot-operated switch is used.
CDD measuring system
quality requirements are becoming tougher all the time. Quality is assured
by the Cosmic 32M CDD conductor damage detector, a unique feature in this
price class. The conductor damage detector detects any touching of the
conductor by the blades during stripping. If contact is detected, the
machine stops and the cable can be removed. Choice of having just the cut
zone monitored or the entire stripping length.
- Flat grippers (for smooth conductors, e.g.
- Thin grippers (for short insertion lengths)
- Foot-operated switch
- Air blow cleaning
- Fault alarm Warning buzzer (Cosmic 32M CDD)